Some random air support

By the time the recent Joy of Six show came around I really fancied painting some 1/300th scale aircraft just for the hell of it. 

Fortunately friend of the blog Richard Phillips sells the Scotia Micromodels range at shows and attends  Joy of Six so after a rummage through his drawers (Ooh er Matron!) I came away with a selection of early Cold War British jets.

First up is this English Electric Canberra. The Luftwaffe acquired a small number. They were officially used as target tugs (hence the bright colour scheme) but there is some evidence that they were in fact used for photographic and electronic surveillance of Warsaw Pact military operations across the Inner German Border.

Fellow Cold War Commander Andy T has a model of one of these aircraft in an all-over orange scheme so I decided to go with the part-orange scheme seen here.

The crosses on the wings (one upper and one lower) were from my spares box. They are probably over 40 years old but they went on fine with a little decal fix and softening solution. The remaining markings are hand painted or applied with a Staedler waterproof pen.

Next up is a DeHavilland Vampire in Indian Airforce colours.

Obviously a much simpler, and quicker, paint scheme; just all-over Vallejo Air Aluminium.

The Vampire seems to have variants with and without little winglets outboard of the tail. Their absence on this model pushed me to depict an aircraft in Indian markings.

Finally we have a Royal Swedish Air Force DeHavilland Venom.

I do like this model in its grey and green scheme (I used Vallejo Pale Grey and Reflective Green over a Middle Sea Grey base coat). 

The Venom is noticeably larger than the Vampire and while it should be a little bigger I think Scotia have overdone it. Never mind though; in these colour schemes they're unlikely to see action over the same table at the same time!

So that was fun. Has it scratched that itch for a while or has it just reminded me of how much fun painting 1/300th scale planes can be? We'll see over the next few months!

Upgrading the dice tower

As things stand my recently completed dice tower is a little plain. 

It was always my plan that I improve the thing to make it sit a little more comfortably among a range of terrain types. Adding a Neodymium magnet to the front wall has allowed me to attach a couple of temporary fixtures.  

This first one goes down the generic fantasy route:

It's a plastic bit, probably Games Workshop I guess, that's been in the spare bits box for years. It's painted in a dark bronze, dry brushed with brass and then covered in my usual home-made verdigris wash.

Alternatively I can bring the tower into a more historical setting with this little window.

It's made from pieces of thin card and an off-cut of Wills plastic pantile sheet.

I'm open to suggestions as to what other options I might add. Perhaps a range of Gloranthan runes to fit a variety of cults?

Another TacWWII marker

I had a play around on Tinkercad yesterday and designed a new marker for TacWWII:

Sized at 75mm x 40mm, these company markers can potentially fill two functions.

Having spent ages advancing infantry companies through the dense forests of Manchuria in a recent game, I thought it would be useful to just have one base to move, specifically when the troops concerned were nowhere near the enemy.

In addition they could act as blinds allowing for limited intelligence as to enemy strength. Each marker carries an identifying letter on the rear.

These letters can be used to identify particular companies on the order of battle sheet. The opposing player will be kept in the dark as to unit type until the company can be detected (though speed of movement may give some clues!)

A Vintage Classic

My mate Mark P bought me a couple of Airfix kits as Christmas presents. This one has just reached completion:

It's the Tank Mk 1 from the Vintage Classics range. It's a 1967 moulding so nearly as old as I am!

The kit comes with a single decal and a painting guide for a vehicle at Fleurs-Courcelette during the Battle of the Somme in September 1916. However, I decided I'd paint mine in an overall grey scheme representing a vehicle prepared for testing at the Lincoln factory earlier in the year.

It's generally not too difficult a kit to build. A little filling and sanding was necessary to hide some of the joins between the armour plates. The biggest problem is attaching the steering trailer to the complex mechanism of springs at the rear of the hull. I think a permanent display base is going to be needed to prevent future breakage.